ADTRAN 624, 612, 616, 606, 604 L2 Protocol ALL-ETH-802.3 Protocol, L2 Protocol ALL-ETH-802.3 Config

Section 4 User Interface Guide Total Access 600 Series System Manual

L2 PROTOCOL (ALL FIRMWARE) – ETH INTERFACE > 802.3 PROTOCOL

Configure the L2 PROTOCOL parameters and view the status of the Ethernet interface from this menu.

L2 PROTOCOL (ALL–ETH–802.3) > PROTOCOL

Displays the L2 PROTOCOL for the 10/100BaseT Ethernet port. Currently only 802.3 is supported.

L2 PROTOCOL (ALL–ETH–802.3) > CONFIG

Configure the mode for this 10/100BASET Ethernet port from this menu.

L2 PROTOCOL (ALL–ETH–802.3) > CONFIG > MODE

The mode identifies how the data will be forwarded. The choices are:

ROUTE IP (def)	All IP data will be routed
BRIDGE ALL	All data will be bridged
ROUTE IP/BRIDGE OTHER	All IP data will be routed. All other data will be bridged.

L2 PROTOCOL (ALL–ETH–802.3) > STATUS

View the L2 PROTOCOL statistics for the 10/100BASET Ethernet port from this menu.

L2 PROTOCOL (ALL–ETH–802.3) > STATUS > TX PACKETS

Total number of packets transmitted out the Ethernet port.

L2 PROTOCOL (ALL–ETH–802.3) > STATUS > RX PACKETS

Total number of packets received from the Ethernet port.

L2 PROTOCOL (ALL–ETH–802.3) > STATUS > TX ERRORS

Total number of transmit errors encountered on Ethernet port.

L2 PROTOCOL (ALL–ETH–802.3) > STATUS > SINGLE COLLISIONS

Total number of single collisions before successful transmission.

L2 PROTOCOL (ALL–ETH–802.3) > STATUS > MULTIPLE COLLISIONS

Total number of multiple collisions before successful transmission.

L2 PROTOCOL (ALL–ETH–802.3) > STATUS > EXCESSIVE COLLISIONS

Total number of collisions that resulted in packet being dropped.

L2 PROTOCOL (ALL–ETH–802.3) > STATUS > DEFERRED TRANSMISSIONS

Total number of packets deferred due to collisions.

L2 PROTOCOL (ALL–ETH–802.3) > STATUS > CARRIER SENSE ERRORS

Total number of carrier sense errors encountered (no link integrity).

116 © 2004 ADTRAN, Inc. 61200624L1-1B