ADTRAN 604, 612, 616, 606, 624 system manual This Selection enables IP on this PVC

Section 4 User Interface Guide Total Access 600 Series System Manual

ROUTER > CONFIG > INTERFACES (NETWORK)

Configure the layer 3 options for the network interface from this menu.

The network interface will display in the ROUTER > CONFIG > INTERFACES table showing the name of the network technology (i.e. T1, SHDSL, ADSL, SDSL), but only once a PVC to the router (ATM) or DS0s to the router (TDM) have been configured.

ROUTER > CONFIG > INTERFACES (NET) > SUB-INTERFACE

This is a read-only field which displays the physical and logical port of the interface using the following nomenclature: [A.B], where A represents the physical port (network interface is 0, Ethernet is 1) and B represents the logical port for the Layer 2 protocol (i.e. PVC for Frame Relay, PPP link, etc.) Each configured logical port is assigned a number corresponding to the order in which they are listed in the L2 Protocol configuration fields.

ROUTER > CONFIG > INTERFACES (NET)> SETUP

Configure the IP parameters for this interface and sub-interface from this menu.

ACTIVE

This Selection enables IP on this PVC.

VPI

ATM virtual port identifier assigned to this sub-interface in the L2 PROTOCOL menus. This field is only applicable when L2 protocol for this sub-interface is ATM.

VCI

ATM virtual channel identifier assigned to this sub-interface in the L2 PROTOCOL menus. This field is only applicable when L2 protocol for this sub-interface is ATM.

DLCI

Data Link Connection Identifier assigned to this PVC in the L2 PROTOCOL menus. This field is only applicable when L2 protocol for this sub-interface is FRE.

ADDRESS MODE

Specifies the method the unit uses to determine the local and far-end IP addresses. The choices are USER SPECIFIED (default), DHCP CLIENT, or IARP. USER SPECIFIED allows the user configuration for Local IP and Far-End IP addresses, DHCP CLIENT is used for the Total Access 6XX to learn his IP address from a DHCP server. IARP allows the unit to determine the far-end IP address using inverse ARP.

LOCAL IP ADDRESS

This is the IP address for this PCV. This field is not visible when ADDRESS MODE is set to DHCP

CLIENT.

122 © 2004 ADTRAN, Inc. 61200624L1-1B