ADTRAN 616, 612, 606, 624, 604 system manual DLP-7 Total Access 600 Series System Manual

Section 5 DLP-7 Total Access 600 Series System Manual

Perform the steps below in the order listed.

1.Connect to the Total Access 6XX using the 10/100BASET interface.

If you are not already connected to the unit’s ETHERNET port using Telnet client software, use the procedure in DLP-5,Connecting to the Unit Using Telnet, to connect to the unit.

2.Log in to the unit using the read-write password (see DLP-2,Logging in to the System for details).

3.Verify the TFTP server is running on the network. The user may ping the TFTP server from the Total Access 6XX to verify communication.

A TFTP server ships as part of the ADTRAN Utilities. If using ADTRAN Utilities, choose

START > PROGRAMS > ADTRAN UTILITIES > TFTP SERVER to start the server.

4. Download the firmware upgrade file to your computer.

If using ADTRAN Utilities, save the upgrade file to the “ADTNUTIL” directory on your hard drive.

5.Go to the SYSTEM UTILITY menu and select the UPDATE FIRMWARE menu; press <Enter>.

6.Go to the TRANSFER METHOD menu and select TFTP.

7.Set the TFTP SERVER ADDRESS to the IP address of the machine running the TFTP server program.

If using ADTRAN Utilities, this will be the IP address that appears in the TFTP SERVER STATUS window.

8.Enter the filename of the update file into the TFTP SERVER FILENAME field. If the file is located in a directory other than ADTNUTIL, the entire path and filename are required.

204 © 2004 ADTRAN, Inc. 61200624L1-1B