Section 4 User Interface Guide

Total Access 600 Series System Manual

 

 

Layer 2 Protocol (FRE) Configuration – T1 Interface (Continued)

7Set DLCI to the DLCI number. This DLCI should match what is programmed in the network Frame Relay switch.

Set mode to BRIDGE ALL. Using this menu you also have the option to route

8only IP packets and bridge all other data packets (ROUTE IP/BRIDGE OTHER) or route all IP data packets on this PVC (ROUTE IP).

9Left arrow back to the main menu to save the changes.

Layer 2 Protocol (PPP) Configuration – T1 Interface

Step

Action

1From the main menu, select L2 PROTOCOL and press <ENTER>.

2Use the arrow keys to select the PROTOCOL field for the T1 interface. Press <ENTER>. Select PPP from the list of available protocols.

3Highlight the CONFIG menu for the T1 interface and press <ENTER>.

Set mode to BRIDGE ALL. Using this menu you also have the option to route

4only IP packets and bridge all other data packets (ROUTE IP/BRIDGE OTHER) or route all IP data packets on this connection (ROUTE IP).

Highlight AUTHENTICATION and press <ENTER> to change options related to how the link is established. Default is TX METHOD = NONE

and RX METHOD = NONE. If TX METHOD and RX METHOD are set to any option

5other than NONE, TX/RX USERNAME and PASSWORD options appear. The Total Access 6XX supports various combinations of PAP, CHAP, and EAP for PPP authentication. Refer to L2 Protocol (TDM–T1–PPP) > Config > Authentication on page 91 for more details.

Left arrow out of the AUTHENTICATION menus, highlight the PPP menu, and

6press <ENTER>. Use the PPP menus to configure parameters associated with the PPP link. Refer to L2 Protocol (T1 TDM–T1–PPP) > Config on page 91 for more details.

7Left arrow back to the main menu to save the changes.

Layer 2 Protocol Configuration – Ethernet Interface

Step

Action

1From the main menu, select L2 PROTOCOL and press <ENTER>.

2Highlight the CONFIG menu for the ETH (Ethernet) interface and press <ENTER>.

160

© 2004 ADTRAN, Inc.

61200624L1-1B

Page 162
Image 162
ADTRAN 606, 612, 616, 624, 604 system manual ADTRAN, Inc