ADTRAN 612, 616, 606, 624 L2 Protocol ATM-NET-CUMTN Status Dlci State, L2 Protocol ATM V35 Protocol

Total Access 600 Series System Manual Section 4 User Interface Guide

L2 PROTOCOL (ATM–NET–CUMTN) > STATUS> DLCI STATE

This is a read-only field that displays the live DLCI state.

L2 PROTOCOL (ATM–NET–CUMTN) > STATUS > PROTOCOL STATUS

This is a read-only field that displays the live protocol status. Menu visible for physical and logical VOICE ports only.

L2 PROTOCOL (ATM–NET–CUMTN) > STATUS > PROTOCOL STATUS > POTS STATS

View the voice port activity and coding type.

L2 PROTOCOL (ATM–NET–CUMTN) > STATUS > PROTOCOL STATUS > CLEAR STATS

Clears all recorded statistics for the interface and returns all counters to 0.

L2 PROTOCOL (ATM FIRMWARE) – V.35 INTERFACE

Configure the L2 PROTOCOL parameters and view the status of the V.35 interface using items from this menu. The V.35 interface is only available when the configured network protocol is ATM. Refer to L2 Protocol (ATM Firmware) – NET> ATM on page 101.

L2 PROTOCOL (ATM – V35) > PROTOCOL

Configure the L2 PROTOCOL mode. Choices are FRF5 (def) and FRF8. Selecting FRF5 configures the interface for network interworking and should be used for Frame Relay over ATM applications. Selecting FRF8 configures the interface for service interworking allowing the Total Access 600 Series to make the translation between Frame Relay signaling on the V35 interface and ATM protocols on the network interface.

L2 PROTOCOL (ATM – V35) > CONFIG

Configures the L2 PROTOCOL parameters for either FRF5 or FRF8 signaling.

L2 PROTOCOL (ATM – V35) > CONFIG > UNI MAINT PROTOCOL

Specifies the maintenance protocol or signaling protocol between the local V.35 port and the attached DTE port. The choices are ANNEX D (def), ANNEX A, LMI, and STATIC.

L2 PROTOCOL (ATM – V35) > CONFIG > UNI POLL TIMEOUT T392 (5-30)

T392 for signaling protocol. This parameter has no meaning if the UNI MAINT PROTOCOL is set to STATIC (no signaling). The default setting is 10.

L2 PROTOCOL (ATM – V35)> STATUS

Displays the L2 statistics for FRF5 or FRF8 operation.

61200624L1-1B © 2004 ADTRAN, Inc. 113