ADTRAN 624, 612, 616, 606, 604 Turns this entry active when set to YES. Default is no, Mac, List

Section 4 User Interface Guide Total Access 600 Series System Manual

SECURITY > FILTERS > INTERFACES > SET-UP

Enable packet blocking or forwarding and apply pre-defined filter exceptions from this menu.

INCOMING

The packets received on the selected interface can be filtered in three ways:

DISABLE (DEF)

BLOCK ALL

FORWARD ALL

IN EXCEPTIONS

Turns off packet input filtering. No incoming packets are blocked.

All incoming packets from the interface are blocked except as defined in

the SECURITY > FILTERS > INTERFACES > SETUP > IN EXCEPTIONS list.

All incoming packets from the interface are not blocked except as defined

in the SECURITY > FILTERS > INTERFACES > SETUP > IN EXCEPTIONS list.

Define exceptions to the forward/block all rules established using the INCOMING field. The

Total Access 6XX allows for a list of up to 32 filter entries which are performed in the order they appear on the list.

#

Indicates the entry number in the In Exceptions table.

ACTIVE

Turns this entry active when set to YES. Default is NO.

TYPE

Selects the filter define list to reference (default is MAC).

MAC	from the SECURITY > FILTERS > FILTER DEFINES > MAC FILTER DEFINES
	list.
PATTERN	from the SECURITY > FILTERS > FILTER DEFINES > PATTERN FILTER
	DEFINES list.
IP	from the SECURITY > FILTERS > FILTER DEFINES > IP FILTER DEFINES list.

FILTER LIST NAME

Selects between filters defined in the list. Default is no entry in filter list name.

146 © 2004 ADTRAN, Inc. 61200624L1-1B