Section 4 User Interface Guide

Total Access 600 Series System Manual

 

 

DS0 MAPS > ACTIVE MAP

Activates one of the two dedicated maps (MAP 1 or MAP 2), or the DUAL T1 MAP (only available in units with the optional DSX-1 interface). In the DUAL T1 mode, the built-in DSX-1 interface DSX[3] can be utilized as a secondary T1 connection. In DUAL T1 mode, the second T1 is limited to voice connections on FXS and FXO modules. For example, the user may map all 24 DS0s on the network T1 to the router, and on the second T1 (DSX-1 interface) map all 24 DS0s to the FXS cards. Default is MAP 1.

DS0 MAPS > APPLY TEMPLATE TO MAP 1

Choices are CURRENT MAP 1, CURRENT MAP 2, D4 MAP, D1D MAP, FULL ROUTER, and CLEAR MAP. Default

is CURRENT MAP 1. D4 MAP automaps the voice port in a 1-to-1 configuration. D1D MAP maps voice ports in an SLC-96 configuration. FULL ROUTER maps all 24 DS0s to the router at 64K. CLEAR MAP clears the entire map.

DS0 MAPS > EDIT/VIEW MAP 1

Define map 1. The map allows the user to assign services and ports to the individual DS0s 1-24.

In the default configuration for TDM A.04.XX firmware, DS0 24 is mapped to the router at 64K on Map 1.

DS0 MAPS > EDIT/VIEW MAP 1 > DS0

Displays the network T1 time slot to be assigned.

DS0 MAPS > EDIT/VIEW MAP 1 > SERVICE

When you select this option, a list of available services displays. OPEN (default) indicates that the DS0 is not currently assigned to any specified service and is available for use. For a module listing, the module name is shown. For example, FXS indicates that an FXS module is installed and FXO indicates an FXO module (available as an option only on Total Access 624 systems). Select TA IAD to map a network timeslot to the V.35 port or the internal router for data applications. DSX-1maps DS0s from the network T1 to the DSX-1 interface for voice or clear channel data applications. Pick the appropriate service, and press <ENTER>.

DS0 MAPS > EDIT/VIEW MAP 1 > PORT

When you select this option, a list of ports appears. Pick the appropriate port, and press <ENTER>. The selection list shows only the remaining ports available to be assigned. It may be necessary to unassign a port in order to reassign it elsewhere. For voice connections (FXS or FXO), the valid port range is limited by the number of installed voice ports on your system. For example, a Total Access 604 has 4 available voice ports, a Total Access 608 has 8 available voice ports, etc. When using the DSX-1 interface (specified under the SERVICE field), the PORT becomes an indicator of DS0 usage and the valid range is 1 to 24 (24 DS0s on a T1).

150

© 2004 ADTRAN, Inc.

61200624L1-1B

Page 152
Image 152
ADTRAN 606, 612, 616, 624, 604 system manual DS0 Maps EDIT/VIEW MAP 1 DS0, Displays the network T1 time slot to be assigned