ADTRAN 624, 612, 616, 606, 604 Session Management Keystrokes, Configuration Keystrokes, To do this

Section 4 User Interface Guide Total Access 600 Series System Manual

To do this...

Move to the bottom of a screen

Ascend one menu level

Jump to terminal mode

Jump to NAT menu

Press this key...

Z

Backspace

CTRL+T

CTRL+N

Session Management Keystrokes

To do this...	Press this key...
Log out of a session	CTRL+L
Refresh the screen	CTRL+R
To save time, only the portion of the screen that has changed is refreshed. This
option should only be necessary if the display picks up incorrect characters caused
by disconnecting and reconnecting the terminal session.

Configuration Keystrokes

To do this...	Press this key...
Restore factory default settings	F
This setting restores the factory defaults based on the location of the cursor. If the
cursor is on an interface line (in the INTERFACES menu), then only the selected
interface is updated to factory defaults.
Copy selected items to the clipboard	C
The amount of information you can copy depends on the cursor location when you
press <C>:
If the cursor is over an editable field, only that item is copied.
If the cursor is over the index number of a list, then all of the items in the row of
the list are copied. For example, if the cursor is over the selection # field in the
INTERFACES screen, all of the information associated with the interface is
copied.
Paste the item stored in the clipboard, if the information is compatible	P
You must confirm all pastes — except those to a single editable field.
Increment the value of certain types of fields by one when you paste information	>
into those fields
Decrement the value of certain types of fields by one when you paste information	<
into those fields
Save the current configuration immediately to flash memory	CTRL+W
Insert a new list item	I
For example, add a new item to the TELNET USER connection list by pressing <I>
while the cursor is over the index number.

46 © 2004 ADTRAN, Inc. 61200624L1-1B