ADTRAN 604 System Config Management Craft Port Idle Time, System Config Management Telnet Access

Section 4 User Interface Guide		Total Access 600 Series System Manual
	Table 2. Instructions for Changing Passwords
	Step	Action

1Select the PASSWORD field—a new PASSWORD field displays.

2Type the new password in the ENTER field.

3Type the new password again in the CONFIRM field.

SYSTEM CONFIG > MANAGEMENT > CRAFT PORT > IDLE TIME

This option defines the amount of time in minutes user may stay connected without any activity on the CRAFT port before the user is automatically logged out of the system. A value of 0 disables this inactivity timer function enabling users to stay connected until manually logged out. The value range is 0 (def) to 255 (minutes).

SYSTEM CONFIG > MANAGEMENT > CRAFT PORT > BAUD RATE

This is the asynchronous rate that the CRAFT port will run. The possible values are 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200. The default value is 9600. The unit and the VT100 terminal or PC with terminal emulation software must be set for the same baud rate.

SYSTEM CONFIG > MANAGEMENT > CRAFT PORT > DATA BITS

The number of data bits that the CRAFT port sends in a frame. The possible values are 7 or 8 (def) bits. The unit and the VT100 terminal or PC with terminal emulation software must be set for the same number of data bits.

SYSTEM CONFIG > MANAGEMENT > CRAFT PORT > PARITY

This is the asynchronous parity that the CRAFT port will run. The possible values are NONE (def), ODD, or EVEN. The unit and the VT100 terminal or PC with terminal emulation software must have the same parity setting.

SYSTEM CONFIG > MANAGEMENT > CRAFT PORT > STOP BITS

This is the number of stop bits used for the CRAFT port. The possible values are 1 (def), 1.5 or 2. The unit and the VT100 terminal or PC with terminal emulation software must have the same number of specified stop bits.

SYSTEM CONFIG > MANAGEMENT > TELNET ACCESS

Activate the Telnet access and set up the various Telnet parameters from this menu. The Total Access 6XX supports up to five simultaneous Telnet sessions.

The Total Access 6XX ships with default Telnet Access parameters of: guest (user), password (password). Change this password during the initial configuration to protect your unit.

52 © 2004 ADTRAN, Inc. 61200624L1-1B