ADTRAN 616, 612, 606, 624 Setting up the Total Access 6XX to use Syslog, Setting Up the Syslog Host

Section 5 DLP-15 Total Access 600 Series System Manual

Setting up the Total Access 6XX to use Syslog:

1.Log in to the system with maximum rights (see DLP-2,Logging in to the System). Once you have logged into the Total Access 6XX, go to SYSTEM CONFIG/SYSLOG. Set the options as follows:

•SYSLOG IP: Enter the IP address of the PC where the Syslog host resides

•SYSLOG FORMAT: Specify the Syslog format as either ADTRAN (to work with ADTRAN Utilities) or UNIX (to work with a standard UNIX Syslog server)

•SYSLOG FACILITY: Specify the facility destination of log events; Options are LOCAL0 to LOCAL7

Setting Up the Syslog Host:

1.On your PC, go to START/PROGRAMS/ADTRAN UTILITIES/SYSLOG. When the Syslog window opens, you will see LOCAL0 through LOCAL7 listed on the left. This should correspond with the HOST FACILITY specified in the Total Access 6XX. The Syslog program must be open on your PC in order for it to record Total Access 6XX information. The Syslog files can be viewed through the Syslog window, and they are also available under the ADTRAN Utilities Folder named LOCALX.TXT, where X can equal 0 through 7. You can also view the LOCALX.TXT file by clicking on EDIT LOG.

224 © 2004 ADTRAN, Inc. 61200624L1-1B