ADTRAN 604, 612 This lists the contents of the unit’s IP route table, Port gateway is located on

Section 4 User Interface Guide Total Access 600 Series System Manual

UDP PORT TYPE

The choices are STANDARD (def) and SPECIFIED. The following standard UDP protocols are relayed when set: DHCP, TFTP, DNS, NTP (Network Time Protocol, port 123), NBNS (NetBios Name Server, port 137), NBDG (NetBIOS Datagram, port 138), and BootP. When SPECIFIED is set, the UDP port (1 to 65535) can be specified in the UDP Port columns (up to three per server).

UDP PORT 1, 2, 3

Used for specifying UDP ports to be relayed. These fields only apply when UDP PORT TYPE is set to SPECIFIED. Default is 0.

ROUTER > STATUS

View the IP ROUTES, IP STATS, ARP CACHE, DHCP SERVER, and DHCP CLIENT statistics from this menu.

ROUTER > STATUS > IP ROUTES

This lists the contents of the unit’s IP route table.

ROUTER > STATUS > IP ROUTES > IP ADDRESS

Network or host destination address.

ROUTER > STATUS > IP ROUTES > NETMASK

Network mask applied to the destination address.

ROUTER > STATUS > IP ROUTES > GATEWAY

Host or router to receive this packet.

ROUTER > STATUS > IP ROUTES > PORT

Port gateway is located on:

LOCAL	Sent directly to the unit’s router
ETH0	The unit’s Ethernet port
WAN0	The unit’s first PPP bundle
FR 0 . . . FR 9	The unit is connected up to 10 DLCIs

ROUTER > STATUS > IP ROUTES > USE

Number of times the unit has referenced the route.

132 © 2004 ADTRAN, Inc. 61200624L1-1B