ADTRAN 612, 616, 606, 624, 604 system manual DLP-7 Updating the Firmware using Tftp, Introduction

DLP-7 Updating the Firmware using TFTP

Introduction

The Total Access 6XX supports firmware updates using TFTP or XMODEM. (Use the 10/100BASET Ethernet port and TFTP from a network server, or use XMODEM and the rear CRAFT interfaces.) This DLP provides the steps for a successful firmware upgrade using the 10/100BASET Ethernet port and a TFTP server. (See DLP-8,Updating the Firmware using XMODEM, for instructions on using XMODEM.)

Tools and Materials Required

•A PC with Telnet client software

•A TFTP server accessible on the local network

A TFTP server is provided as part of the ADTRAN Utilities software suite supplied with your shipment.

To prevent electrical shock, do not install equipment in a wet location or during a lightning storm.

Electronic equipment can be damaged by static electrical discharge. Before handling modules, put on an antistatic discharge wrist strap to prevent damage to electronic components. Place equipment in antistatic packing material when transporting or storing. When working on equipment, always place it on an approved antistatic mat that is electrically grounded.

61200624L1-1B © 2004 ADTRAN, Inc. 203