ADTRAN 604, 612, 616, 606, 624 Number of inbound packets using this translation, Napt Address

Total Access 600 Series System Manual Section 4 User Interface Guide

IN COUNT

Number of inbound packets using this translation.

OUT COUNT

Number of outbound packets using this translation.

NAPT ADDRESS

(Read only) Displays the NAPT address for the router. This will either be the interface address or the user-specified NAPT address.

ENTRY COUNT

The number of translation entries that are currently available in the NAT VIEW table. The Total Access 6XX supports up to 2000 active translations at any one time.

ENTRY OVERFLOW COUNT

The number of overflow NAT VIEW entries. After the maximum number of translations is reached, the Total Access 6XX will not add new translations, but continues to keep a count of any new translation requests it cannot accommodate.

RIP

Use this menu to enable RIP on this interface.

VERSION

Enables or disables RIP and specifies the RIP protocol. Choices are: OFF (which disables RIP), V1 (RIP Version 1) or V2 (RIP Version 2). The default is OFF

METHOD

Specifies the way the RIP protocol sends out its advertisements. The following options are available:

SPLIT HORIZON

(Default) Only routes not learned from this circuit are advertised.

POISON REVERSE

All routes are advertised, but the routes learned from this point are “poisoned” with an infinite metric.

DIRECTION

Allows the direction at which RIP advertisements are sent and received to be specified.

61200624L1-1B © 2004 ADTRAN, Inc. 127