Manuals / ADTRAN / Communications / Telephone

ADTRAN 624, 612, 616, 606, 604 system manual Number of Icmp Destination Unreachable messages received

Models: 606 624 612 616 604

1 264

Download 264 pages 28.45 Kb

Page 138

Section 4 User Interface Guide	Total Access 600 Series System Manual

ROUTER > STATUS > IP STATS > ICMP

ICMP MESSAGES RECEIVED

The total number of ICMP messages the unit received. Note that this counter includes all those

counted by ICMP SPECIFIC ERRORS.

ICMP SPECIFIC ERRORS

The number of ICMP messages the unit received but determined as having errors (bad ICMP checksums, bad length, etc.)

ICMP DEST. UNREACHABLE MSGS RCVD

The number of ICMP Destination Unreachable messages received.

ICMP TIMEOUTS RECEIVED

The number of ICMP Time Exceeded messages received.

ICMP PARAMETER PROBLEM MSGS RCVD

The number of ICMP Parameter Problem messages received.

ICMP SOURCE QUENCH MSGS RCVD

The number of ICMP Source Quench messages received.

ICMP REDIRECTED MESSAGES RCVD

The number of ICMP Redirect messages received.

ICMP ECHO REQUEST MSGS RCVD

The number of ICMP Echo (request) messages received.

ICMP ECHO REPLY MSGS RCVD

The number of ICMP Echo Reply messages received.

ICMP TIMESTAMP REQUEST MSGS RCVD

The number of ICMP Timestamp (request) messages received.

ICMP TIMESTAMP REPLY MSGS RCVD

The number of ICMP Timestamp Reply messages received.

ICMP ADDRESS MASK REQUEST MSGS RCVD

The number of ICMP Address Mask Request messages received.

136

© 2004 ADTRAN, Inc.

61200624L1-1B

Image 138

ADTRAN 624, 612 Number of Icmp Destination Unreachable messages received, Number of Icmp Time Exceeded messages received

Contents

Total Access 600 Series Total Access 600RTrademarks To the Holder of the ManualAbout this Manual Revision History ConventionsDocument Revision Date Description of Changes Safety Instructions Save These Important Safety InstructionsFCC-Required Information REN/SOC FIC UsocADTRAN, Inc Affidavit Requirements for Connection to Digital Services FCC Rules and Regulations Industry Canada Compliance Information Canadian Emissions RequirementsRepair and Return Pre-Sales Inquiries and Applications SupportInstallation and Maintenance Support Post-Sale SupportTraining ADTRAN, Inc Table of Contents Table of Contents Total Access 600 Series System Manual Contents System DescriptionSystem Overview Features and Benefits Analog Ports TestingFrame Relay Support DTE InterfacePerformance Monitoring IAD SystemsAdsl SdslShdsl At-A-Glance Specifications Equipment DimensionsPower Requirements Reviewing the Front Panel Design TablesADTRAN, Inc Equipment Dimensions Power RequirementsReviewing the Front Panel Design Total Access 604/608 Front Panel LEDsData TX/RXLink VoiceTotal Access 6XX ATM Front Panel LEDs For these LEDs This color light Indicates thatTotal Access 612/616/624 Front Panel Layout Total Access 612/616/624 TDM Front Panel LEDs Reviewing the Rear Panel DesignTotal Access 604/608 Rear Panel Voice Connection Ntwk ConnectionCraft Port PIN Name DescriptionDescription 10/100BaseT Connection Battery Backup ConnectionAC Power Connection ConnectionProvides the DSX-1 port pinout Life Line Analog ConnectionDSX-1 Interface PIN DescriptionAT-A-GLANCE Specifications Lists the unit specificationsApplication Feature Specification Analog Ports Routing EthernetManagement Tools Required Unpack and Inspect the System Grounding Instructions Mounting OptionsTools Required This section discusses Total Access 600 Series installationIntroduction Unpack and Inspect the SystemContents of Adtran Shipments Grounding InstructionsWallmounting the Unit Wallmount InstallationMounting Options Tools NeededWallmount Orientation AC Powered Systems Rackmounting the Total Access 612/616/624Supplying Power to the Unit Rackmount InstallationUser Interface Guide User Interface Guide Total Access 600 Series System Manual Menu Path Navigating the Terminal MenuTerminal Menu Window Window PanesTo do this Press this key Right Window Pane NotationThis notation Means that Additional Terminal Menu Window Features Navigating using the Keyboard KeysMoving through the Menus Configuration Keystrokes Session Management KeystrokesTo do this Selecting the Appropriate Menu Getting HelpMain Menu and System Control DS0 MapsSecurity Levels Menu DescriptionsMenus Submenus SUB-SUBMENUS System Info Read only Displays the registered Clei code for the unitRead only Displays the current bootcode revision System Config Management Craft Port System ConfigSystem Config Management System Config Management Craft Port Password ProtectSystem Config Management Craft Port Data Bits System Config Management Craft Port Idle TimeSystem Config Management Craft Port Baud Rate System Config Management Craft Port ParitySystem Config Management Telnet Port System Config Management Telnet Access AccessSystem Config Management Telnet Access Authen Method System Config Management Telnet Access User ListDisplays the assigned user name Cannot reset the unit or enter terminal modeSystem Config Management Telnet Access Active Sessions Displays the TCP port used for this Telnet sessionSystem Config Management Snmp Management Access System Config Management Telnet Access IP Access ListSystem Config Management Snmp Management System Config Management Snmp Management Trap DelaySystem Config Management Snmp Management Traps System Config Management FDL ManagementSystem Config Management FDL Management IP Netmask System Config Management FDL Management ModeSystem Config Management FDL Management Link IP Address System Config Management FDL Management FAR-END IP AddressSystem Config Syslog Syslog IP System Config Syslog Syslog FormatSystem Config Syslog Syslog Facility Syslog using Terminal Mode This parameter is for Adtran internal use only System Config Syslog Sdsl Level System Config Syslog Tollbrg LevelSystem Config Syslog Cmcp Level System Config Syslog L1 LevelSystem Config Syslog ATM Level System Config Syslog Pots LevelSystem Config Syslog Lescas Level System Config Syslog Coppercom LevelFactory default is GMT-6 Central Minimum required level for sending Filter log messagesSystem Config Network Time Refresh System Config Network Time Adjust for Daylight SavingSystem Config Network Time Host Address System Config Network Time StatusUse this activator to cancel any Tftp transfer in progress Indicates the current status of the update Indicates the status of the previous updateView the CPU utilization stats from this menu System Utility System UtilizationSystem Utility System Utilization Performance Total packets received read only Activator to start and cancel a ping testTotal packets sent read only Percentage loss based on ping returned from host read onlyActivates the traceroute process Example usage ping 10.0.0.5 r 10 si 1500 so eth0 n Interfaces T1 Config Format Interfaces T1 ConfigInterfaces T1 Config Timing Mode InterfacesDisplays the T1 performance data Displays current alarms and alarm history for T1 interface Indicates whether a test is in progress Interfaces Shdsl Config Radsl AUTO/FIXED Interfaces Shdsl Config NTU/LTU ModeInterfaces Shdsl Config ITU-T/GSPAN Interfaces Shdsl Status NTU/LTU ModeConfigure the Dslam settings from this menu Interfaces Sdsl Config DslamInterfaces Sdsl Config Dslam Setup Internal Adtran use onlyInterfaces Sdsl Status Sdsl Rate Interfaces Adsl Status SNR dBInterfaces Network Adsl Interfaces DSX Interfaces DSX Status Performance Current and Totals SEF Interfaces DSX Status Performance Current and Totals ESInterfaces DSX Status Performance Current and Totals SES Interfaces DSX Status Performance Current and Totals FSInterfaces DSX Status Alarms Alarm History Interfaces DSX Status AlarmsInterfaces DSX Status Alarms Current Alarms Interfaces DSX Status Alarms Clear HistoryConfigure the various Ethernet parameters from this menu Interfaces ETHDisplays the Ethernet status information These options are used to loopback tests Configure the DTE leads from this menuView the status of the DTE leads from this menu Interfaces FXSInterfaces FXS Config Mode Choices are given below. Default is Loop StartInterfaces FXS Config Port Indicates the port of the FXS moduleInterfaces FXS Config MSG IND Interfaces FXS Config SVC ModeInterfaces FXS Config Line Z Interfaces FXS Config Batt ModeDisplays the status of the FXS signal bits Displays the port numberChoices are given below. Default is None This option indicates whether a test is in progressInterfaces FXO Displays the status of the FXO signal bits Indicates the port of the FXO moduleInterfaces FXO Status TB SIG Interfaces FXO Status PortInterfaces FXO Status TA SIG Interfaces FXO Status RA SIGL2 Protocol TDM Firmware L2 Protocol TDM T1 Protocol FRE L2 Protocol TDM T1 ProtocolL2 Protocol TDM T1 Protocol PPP L2 Protocol TDM T1 Protocol HdlcL2 Protocol TDM-T1-PPP Config PPP L2 Protocol T1 TDM-T1-PPP ConfigL2 Protocol TDM-T1-PPP Config Mode L2 Protocol TDM-T1-PPP Config PPP MAX ConfigL2 Protocol TDM-T1-PPP Config PPP Keepalive Period L2 Protocol TDM-T1-PPP Config PPP MAX Timer SECL2 Protocol TDM-T1-PPP Config PPP MAX Failure L2 Protocol TDM-T1-PPP Config PPP Force Peer IP AddressL2 Protocol TDM-T1-PPP Status TX Bytes L2 Protocol TDM-T1-FRE ConfigL2 Protocol TDM-T1-PPP Status RX Pkts L2 Protocol TDM-T1-PPP Status RX BytesL2 Protocol TDM-T1-FRE Config Dlci Mapping NUM L2 Protocol TDM-T1-FRE Config Polling FrequencyL2 Protocol TDM-T1-FRE Config Dlci Mapping L2 Protocol TDM-T1-FRE Config Dlci Mapping ActiveL2 Protocol TDM-T1-FRE Config Dlci Mapping Mode L2 Protocol TDM-T1-FRE Config Dlci Mapping InterfaceL2 Protocol TDM-T1-FRE Config Dlci Mapping Dlci L2 Protocol TDM-T1-FRE StatusL2 Protocol TDM-T1-FRE Status Port Drop Unknown Dlci L2 Protocol TDM-T1-FRE Status Port Current Util %L2 Protocol TDM-T1-FRE Status Port Average Util % L2 Protocol TDM-T1-FRE Status Port Drop Invalid DlciL2 Protocol TDM-T1-FRE Status Pvcs RX Frames L2 Protocol TDM-T1-FRE Status Pvcs StateL2 Protocol TDM-T1-FRE Status Pvcs TX Frames L2 Protocol TDM-T1-FRE Status Pvcs TX BytesL2 Protocol TDM-T1-HDLC Status RX Pkts L2 Protocol TDM-T1-HDLC StatusL2 Protocol TDM-T1-HDLC Status TX Pkts L2 Protocol TDM-T1-HDLC Status TX BytesL2 Protocol TDM-T1-AUTO Status TX Pkts L2 Protocol TDM-T1-AUTO StatusL2 Protocol TDM-T1-AUTO Status State L2 Protocol TDM-T1-AUTO Status RX PktsL2 Protocol ATM Firmware L2 Protocol ATM-NET-ATM Config ATM Config Idle Cells L2 Protocol ATM-NET-ATM ConfigL2 Protocol ATM-NET-ATM Config ATM Config L2 Protocol ATM NET ProtocolL2 Protocol ATM-NET-ATM Config PVC Config NUM L2 Protocol ATM-NET-ATM Config ATM Config HEC CosetL2 Protocol ATM-NET-ATM Config PVC Config L2 Protocol ATM-NET-ATM Config PVC Config ActiveL2 Protocol ATM-NET-ATM Config PVC Config VCI L2 Protocol ATM-NET-ATM Config PVC Config ConnectionL2 Protocol ATM-NET-ATM Config PVC Config Setup Router EAP only PPPL2 Protocol ATM-NET-ATM Config PVC Config Setup Connection V35 Setup Setup Connection V35 Setup Setup UNI Dlci L2 Protocol ATM-NET-ATM Config PVC Config Setup VoiceL2 Protocol ATM-NET-ATM Config PVC Config QOS Connection Voice Setup LES-CAS GW SIML2 Protocol ATM-NET-ATM Status L2 Protocol ATM-NET-ATM Status ATM StatusL2 Protocol ATM-NET-ATM Status ATM Status Clear Stats L2 Protocol ATM-NET-ATM Status PVC Status SUB-INTERFACE L2 Protocol ATM-NET-ATM Status PVC StatusL2 Protocol ATM-NET-ATM Status PVC Status NUM L2 Protocol ATM-NET-ATM Status PVC Status AAL StatsL2 Protocol T1 ATM-T1-ATM Status PVC Status Protocol Status CRC ErrorsRX AAL2 HEC Errors Indicates an EOC cell was received with a voice designationL2 Protocol ATM Firmware Network Interface Cumtn FRE L2 Protocol ATM-NET-CUMTN ConfigClears all recorded statistics and returns all counters to Pots StatsL2 Protocol ATM-NET-CUMTN Config Interface L2 Protocol ATM-NET-CUMTN Config NUML2 Protocol ATM-NET-CUMTN Config Active L2 Protocol ATM-NET-CUMTN Config DlciL2 Protocol ATM V35 Config UNI Poll Timeout T392 L2 Protocol ATM V35 ConfigL2 Protocol ATM V35 Config UNI Maint Protocol L2 Protocol ATM-NET-CUMTN Status Dlci StateL2 Protocol ATM V35 Status Port L2 Protocol V352-ATM Status PvcsInterfaces ATM DSX Config RX OAM L2 Protocol ATM DSX ConfigInterfaces ATM DSX Config TX OAM Configures the voice parameters for the interfaceL2 Protocol ALL-ETH-802.3 Status TX Errors L2 Protocol ALL-ETH-802.3 ConfigL2 Protocol ALL-ETH-802.3 Config Mode L2 Protocol ALL-ETH-802.3 ProtocolL2 Protocol ALL-ETH-802.3 Status RX Collisions L2 Protocol ALL-ETH-802.3 Status RX ErrorsL2 Protocol ALL-ETH-802.3 Status Crcs L2 Protocol ALL-ETH-802.3 Status NON-ALIGNEDView the bridging statistics from this menu Configure the Ethernet Bridging parameters from this menuConfigure the bridge table parameters from this menu View the bridge table status from this menuRouter Router Config Interfaces ETH Setup Use this menu to enable RIP on the LAN interfaceRouter Config Interfaces ETH SUB-INTERFACE Only routes not learned from this circuit are advertisedThis is the mask for the network. Default is Enter the secret used by RIP version 2 hereDisplays the index number in the secondary IP list This Selection enables IP on this PVC MTU NATIcmp Doom Server IP address of the public device Private IP address of the active translationPublic IP address of the active translation Type of protocol active on the translationUse this menu to enable RIP on this interface Number of inbound packets using this translationNumber of outbound packets using this translation Napt AddressUse this menu to set up the Dhcp server Use this menu to enter static routes to other networksDisplays the index number in the static route table Use this menu to enable the Dhcp server on or OFF Router Config Dhcp Server Dhcp ServerRouter Config Dhcp Server Dhcp Address Pools Nbns Server PRI DNS Server PRIDNS Server SEC Nbns Server SECRouter Config UDP Relay Router Config Dhcp Server Exclusion RangesRouter Config Dhcp Server Global Server Options Router Config UDP Relay ModeNetwork mask applied to the destination address This lists the contents of the unit’s IP route tableNetwork or host destination address Host or router to receive this packetView the IP statistics from this menu IP packets from the units IP stack Setting this activator clears the IP Statistics Number of IP datagrams successfully reassembledPacket the unit couldnt route Number of Icmp Time Exceeded messages received Number of Icmp Parameter Problem messages receivedNumber of Icmp Destination Unreachable messages received Number of Icmp Source Quench messages receivedNumber of Icmp Destination Unreachable messages sent Number of Icmp Parameter Problem messages sentNumber of Icmp Address Mask Reply messages received Number of Icmp Time Exceeded messages sentSelecting this activator will clear the Icmp statistics Number of Icmp Address Mask Request messages sentNumber of Icmp Address Mask Reply messages sent View the UDP statistics from this menuView the TCP statistics from this menu Router Status IP Stats TCPLocal port of the TCP connection Selecting this activator clears the TCP statisticsLocal IP address of the TCP connection Remote IP address of the TCP connectionIP address used for resolving MAC address Ethernet address resolved 0=no resolutionConfigure the filter characteristics from this menu Minutes since entry was first entered into the ARP cacheIndicates the entry number in the MAC Filter Defines table Security Filters Filter DefinesSecurity Filters Filter Defines MAC Filter Defines Indicates the entry number in the IP Filter Defines table Security Filters Filter Defines Pattern Filter DefinesSecurity Filters Filter Defines IP Filter Defines 0.0 TCP Estab Security Filters InterfacesSecurity Filters Interfaces SUB-INTERFACE Security Filters Interfaces SET-UP Turns this entry active when set to YES. Default is noSelects the filter define list to reference default is MAC MACLast filter to combination Logically and this filter with the next filter in the listLogically or this filter with the next filter in the list Security Radius Server UDP Port Security Radius ServerSecurity Radius Server Server Security Radius Server SecretSecurity Radius Server Retry Count DS0 Maps MenuDS0 Maps EDIT/VIEW MAP 1 DS0 Displays the network T1 time slot to be assignedDS0 Maps EDIT/VIEW MAP 1 RBS Setting up the Interfaces Appendix A. Configuring the Unit for RoutingInitial Setup T1 Interface Setup Instructions Step ActionConfiguring the Layer 2 Protocol Ethernet Interface Setup InstructionsLayer 2 Protocol FRE Configuration T1 Interface Step Action Layer 2 Protocol FRE Configuration T1 Interface Layer 2 Protocol PPP Configuration T1 Interface Step ActionRouter Options Ethernet Interface Setting the Router OptionsLayer 2 Protocol Configuration Ethernet Interface For the entry to delete and press the D keyRouter Options Setting the Default Gateway Step Action Mapping the DS0s61200624L1-1B ADTRAN, Inc 157 Appendix B. Configuring the Unit for Bridging 61200624L1-1B ADTRAN, Inc 159 160 ADTRAN, Inc Verifying the Bridge Options Bridge Options Step ActionDS0 Mapping Instructions Step Action 162 ADTRAN, Inc Appendix C. Configuring the Unit for Voice Applications Network T1 menus beginning on FXS menus beginning onFXS Interface Setup Instructions Step Action FXS Interface Setup Instructions Appendix D. Configuring the Unit for DSX-1 Applications Network T1 menus beginning on DSX-1 menus beginning onT1 Interface Setup Instructions DSX-1 Interface Setup Instructions Step Action168 ADTRAN, Inc Application Diagram Appendices T1 ATM Applications170 ADTRAN, Inc SWITCH, Set D ATA S Crambling appropriately for your network Layer 2 Protocol Configuration T1 InterfaceEnter the I DLE C Ells format for your network Entered by selecting V Oice under the C Onnection field61200624L1-1B ADTRAN, Inc 173 Appendix B. RFC1483 Quick Start IP Routing 61200624L1-1B ADTRAN, Inc 175 Layer 2 Protocol ATM Configuration T1 Interface ATM-NET-ATM Config PVC Config Setup Router on page 103 forRouter Options Ethernet Interface Step Action Router Options T1 Interface L2 Protocol = ATM Step ActionRouter Options T1 Interface L2 Protocol = ATM Appendix C. RFC1483 Quick Start IP Routing with NAT IP Routing with NATAppendix D. RFC 1483 Quick Start Bridging PVC Config Setup Router on page 103 for more details Bridge menus beginning on Detail Level Procedures 184 ADTRAN, Inc Introduction DLP-1 Connecting a VT100 Terminal or PC to the Craft PortPrerequisite Procedures Tools and Materials RequiredPerform the steps below in the order listed DLP-2 Logging in to the System DLP-2 Total Access 600 Series System Manual DLP-3 Setting IP Parameters IP Address Subnet Mask User guest Password passwordDLP-3 Total Access 600 Series System Manual Access to a PC or other computer connected to the LAN DLP-4 Verifying Communications Over an IP LANDLP-4 Total Access 600 Series System Manual Total Access 600 Series System Manual DLP-4 194 ADTRAN, Inc DLP-5 Connecting to the Unit Using Telnet DLP-5 Total Access 600 Series System Manual 61200624L1-1B ADTRAN, Inc 197 198 ADTRAN, Inc 61200624L1-1B ADTRAN, Inc 199 Enter Have read-only permission for all menu items minimum rights 202 ADTRAN, Inc DLP-7 Updating the Firmware using Tftp DLP-7 Total Access 600 Series System Manual 61200624L1-1B ADTRAN, Inc 205 206 ADTRAN, Inc DLP-8 Updating the Firmware using Xmodem Updating Firmware via the Console Menus DLP-9 Saving the Current Configuration Using Tftp DLP-9 Total Access 600 Series System Manual DLP-10 Loading a Configuration Using Tftp DLP-10 Total Access 600 Series System Manual Xmodem Perform the following steps in the order listed DLP-12 Loading a Configuration Using Xmodem DLP-12 Total Access 600 Series System Manual 61200624L1-1B ADTRAN, Inc 217 Saving the Total Access 6XX configuration Do not enter further key commands until completing StepLoading a configuration into the Total Access Entering commands at the command prompt220 ADTRAN, Inc DLP-14 A.03 to A.04 Firmware Upgrade Upgrade From A.03 to A.03.92 Transition Build to A.04 Upgrade From A.03 to A.04 DirectlyDLP-15 Using the Adtran Utility Syslog Setting up the Total Access 6XX to use Syslog Setting Up the Syslog HostAdditional Syslog Features 226 ADTRAN, Inc DLP-16 Executing Terminal Mode Commands Fstimer start x x is in seconds or fstimer stop Example usage ping 10.0.0.5 r 10 si 1500 so eth0 nExample usage trace 10.0.0.5 h 20 t 1 r 1 so eth0 Telnet hostname/address port230 ADTRAN, Inc DLP-17 Configuring Dual T1 Maps Dual T1 Map Primary T1 Map DSX Map can be mapped to the FXS and FXO access modules only DLP-18 Unit Installation Using the Auto-Config Feature DLP-18 Total Access 600 Series System Manual 61200624L1-1B ADTRAN, Inc 237 238 ADTRAN, Inc DLP-19 TDM to ATM Upgrade Purchase the EC/ADPCM P/N 1200613L1DLP-19 Total Access 600 Series System Manual System Info Firmware Revision field does not display Error 242 ADTRAN, Inc Tftp Server Telnet UtilityVT100 Utility Status Field Meter Field Log FieldTelnet Utility Telnet Menu TreeEstablishes the Telnet session Session MenuClick on Session to open the Telnet session ConnectEdit Menu Options MenuCapture Menu VT100 Utility Provides online help for using the Adtran UtilitiesHelp Menu Opens the online helpPort Menu Tftp Server Identical to the Telnet Capture Menu see Capture Menu onOpens online help Server Menu Print LogMeter Field HelpStatus Field LOG Field252 ADTRAN, Inc Mibs Mibs Supported by TDM Units Standard RFC MIBsEnterprise MIBs MIB Compilation Order for TDM Units Traps Supported by TDM UnitsMIB Variables Supported by TDM Units Mibs Supported by ATM UnitsTcp UdpEgp Dsx161200624L1-1B ADTRAN, Inc 259 Snmp Atm61200624L1-1B ADTRAN, Inc 261 262 ADTRAN, Inc