ADTRAN 604, 616, 606 system manual 61200624L1-1B ADTRAN, Inc 217

DLP-13 Saving and Loading Text Configuration using Terminal Command Line

Introduction

The Total Access 6XX has the ability to download a text file which contains the configuration of the entire unit. This configuration may then be altered in a text editor and uploaded to any Total Access 6XX.

This DLP will explain how to save and load the text configuration file for the ADTRAN Total Access 6XX.

Prerequisite Procedures

You must connect to the Total Access 6XX with a VT100 terminal session (reference DLP-1,Connecting a VT100 Terminal or PC to the CRAFT Port).

To prevent electrical shock, do not install equipment in a wet location or during a lightning storm.

Electronic equipment can be damaged by static electrical discharge. Before handling modules, put on an antistatic discharge wrist strap to prevent damage to electronic components. Place equipment in antistatic packing material when transporting or storing. When working on equipment, always place it on an approved antistatic mat that is electrically grounded.

61200624L1-1B © 2004 ADTRAN, Inc. 217