ADTRAN 616, 612, 606, 624, 604 system manual Perform the following steps in the order listed

Section 5 DLP-11 Total Access 600 Series System Manual

Perform the following steps in the order listed.

1.Connect to the Total Access 6XX using the CRAFT (RJ-48) port on the back of the Total Access 6XX.

If you are not already connected to the unit’s rear CRAFT interface, either with a VT100 compatible terminal or with a PC running VT100 emulation software, follow the procedure in DLP-1,Connecting a VT100 Terminal or PC to the CRAFT Port. Connecting to the CRAFT interface limits the configuration transfer procedure to XMODEM only.

2.Log in to the unit.

3.Go to the SYSTEM UTILITY menu and select CONFIGURATION TRANSFER menu; press <Enter>.

4.Set the TRANSFER METHOD menu to XMODEM.

5.Select SAVE CONFIG REMOTELY to start the transfers. Enter Y to confirm the transfer and prepare the Total Access 6XX for the transfer download.

The following message is displayed: This will begin sending a copy of the current system configuration.

6.Configure the VT100 terminal or terminal emulation software to RECEIVE (and prompt for a filename).

7.View the CURRENT TRANSFER STATUS to verify the progress of the current transfer.

8.From the terminal emulation software, begin the XMODEM transfer by using the appropriate command sequence. For Windows HyperTerminal, select TRANSFER>RECEIVE FILE. Enter the filename (including path) and select XMODEM as the transfer method.

If necessary, refer to the terminal emulation software documentation for help.

When specifying the filename, ensure that the saved file has a .cfg extension; otherwise, the file may not be available for uploading into other Total Access 6XX units.

Because XMODEM data is being transferred inband through the menu interface, the VT100 menus of the Total Access 6XX will be inoperable from the CRAFT interface. You can cancel the update at any time within the terminal emulation software. (Please consult the documentation provided by the terminal emulation software to determine how to do this.)

9.When the transfer has successfully completed, IDLE displays in the CURRENT TRANSFER STATUS field and XMODEM DOWNLOAD COMPLETE displays in the PREVIOUS TRANSFER STATUS field.

214 © 2004 ADTRAN, Inc. 61200624L1-1B