ADTRAN 616, 612, 606, 624, 604 system manual EAP only, Ppp

Section 4 User Interface Guide Total Access 600 Series System Manual

TX METHOD

Specifies the method the Total Access 600 Series uses to obtain PPP authentication from the peer. There are four possible selections:

NONE	The connection will not allow the PPP peer to
	authenticate it.

PAP, CHAP, OR EAP The unit will ask for EAP during the first PPP LCP

	negotiation and allow the PPP peer to negotiate
	down to CHAP or PAP.
CHAP OR EAP	The unit will ask for EAP during the first PPP LCP
	negotiation and allow the PPP peer to negotiate
	down to CHAP but not PAP.
EAP ONLY	The unit will only allow EAP to be negotiated. If
	the PPP peer is not capable of doing EAP, then
	the connection will not succeed.
PAP ONLY	The unit will only allow PAP to be negotiated. If
	the PPP peer is not capable of doing PAP, then
	the connection will not succeed.

RX METHOD

Specifies the method the Total Access 600 Series uses to authenticate the PPP peer. There are four possible selections:

NONE	The connection will not allow the PPP peer to
	authenticate it.

PAP, CHAP, OR EAP The unit will ask for EAP during the first PPP LCP

	negotiation and allow the PPP peer to negotiate
	down to CHAP or PAP.
CHAP OR EAP	The unit will ask for EAP during the first PPP LCP
	negotiation and allow the PPP peer to negotiate
	down to CHAP but not PAP.
EAP ONLY	The unit will only allow EAP to be negotiated. If
	the PPP peer is not capable of doing EAP, then
	the connection will not succeed.
PAP ONLY	The unit will only allow PAP to be negotiated. If
	the PPP peer is not capable of doing PAP, then
	the connection will not succeed.

PPP

Configure the PPP specific parameters such as MAX CONFIG, MAX TIMER, MAX FAILURE, and FORCE PEER IP ADDRESS from this menu.

104 © 2004 ADTRAN, Inc. 61200624L1-1B