Making Calls
This section describes ways to make calls on your 9112i phone, using your handset, speakerphone, or headset.
Dialing a Number
First, take the phone
q. At the dial tone, enter
the number you wish to call. If you are unable to make calls within certain area codes, checkwith your system administrator for any toll restrictions placed on your extension that may restrict your access to long distance area codes or dialing prefixes.
When your party picks up, a timer appears on your display that records the length of your call.
Using Handsfree Speakerphone
The Handsfree feature allows you to speak to someone without using the handset or headset. Your phone must be in either the Speaker, Speaker/Headset or Headset/Speaker Audio Mode. You can set your desired audio mode through #7. Headset Settings in the Options list. For more information, see the section "Customizing Your Phone" in the
9112i Installation Guide.
IP Phone UI
• To dial using handsfree, first
press qand enter a number at the dial tone.
• To answer a call on your phone using handsfree, press
q.
169112i IP Phone User Guide
•If you are in Speaker audio mode, lift the handset and press qto switch between handsfree and handset.
•If you are in Speaker/Headset audio mode, press q
to switch between handsfree and headset.
•When handsfree is on, the speaker light turns on.
Using a Headset
The 9112i accepts headsets through the modular RJ9 jack on the back of the phone. Contact your telephone equipment retailer or distributor to purchase a compatible headset.
Note: Customers should read and observe all safety recommenda- tions contained in headset oper- ating guides when using any headset.
Advanced Volume Controls for the Headset Mic
On the 9112i, there are 3 options for the headset microphone
volume.
IP Phone UI
To change the volume:
1.Press Ito enter the Options list.
2.Use Vto scroll down the list
of options to Headset Settings and press Uto select.
3.Press Vto scroll down to
headset/mic volume and press Uto select.
4.Use Vto scroll down the list and press Uto select your desired volume.
5.Press Uto save changes and Tto exit.
