Aastra Telecom 9120 manual Using feature keys, Saving a feature and light in memory keys

To save a Feature On code:

3.Enter the telephone company fea- ture code for turning the feature on.†

Read the display to conÞrm the number.

4.Press K.

5.Enter the feature name using the dial pad. (See Entering Names on page 16.)

6.Press K.

7.Label the memory key.

To save a Feature Off code:

3.Enter the telephone company fea- ture code for turning the feature off.†

Read the display to conÞrm the number.

4.Press K.

5.Enter the feature name using the dial pad. (See Entering Names on page 16.)

6.Press K.

7.Label the memory key.

Memory keys

†Note: Contact your telephone company for the appropriate feature codes.

Using feature keys

When a memory key is programmed with a feature code, you can use the memory key to activate or deactivate the feature.

To turn a feature on or off:

1.Press the memory key where you stored the desired feature. The display shows the feature name and code.

2.Lift the handset or press either D, Por Y. The feature code is dialed out, which turns the feature on or off.

The active feature applies only to the line you selected or to the prime line if you did not press a line key. For example, if you want to forward all incoming calls, you must turn the feature on for each line.

Note: If the Live dial pad option is turned on, you do not have to lift the handset or press any other button. Pressing the memory key will automatically dial the feature code and put the telephone in Handsfree mode.

Saving a feature and light in memory keys

You can make the set indicator light come on when you turn a feature on and go off when you turn that same feature off. You can only do this with one feature, and the feature must have separate On and Off codes (such as Call Forwarding).

For example, you may want the light to remind you that you have turned Call For- warding on. To do this, use one key to turn the indicator light on when you activate the feature. Use the second key to turn the indicator light off when you deactivate that same feature. The following procedure shows you how to program a FeatureLight On and Off key.

To save a FeatureLight On key:

1.Press K.

2.Do NOT select a memory key yet. To program the light on, press ⁄.

3.Press the desired memory key.

To save a FeatureLight Off key:

1.Press K.

2.Do NOT select a memory key yet. To program the light off, press ‚.

3.Press the desired memory key.

24