Putting a call on mute
You can turn OFF the microphone so that the caller cannot hear you but you can still hear the caller. This only works when you are on a handsfree call.
To mute a call:
1.Press [Handsfree/Mute].
2.Without lifting the handset, make a call.
3.To turn the microphone off, press [Handsfree/Mute] again. You can hear your caller but your caller cannot hear you. The light beside [Handsfree/Mute] flashes.
4.To speak to your caller, press [Handsfree/Mute] again. Each time you press [Handsfree/Mute], you switch between handsfree and mute.
5.When the call is over, hang up the handset or press [Rls].
Using the Redial List
If you do not remember a number you just dialed, you can find it in the Redial List. Pressing [Redial] shows you a list of the last five numbers you called. Once you lift the handset, pressing [Redial] automatically dials the last number.
To make a call from the Redial List:
1.Press [Redial]. The display show the last number you dialed.
2.Find the number you wish to call by pressing [ ] or [ ].
3.When the number is displayed, lift the handset or press either [Handsfree/Mute] or [Dial].
Telephone Setup
Changing the display language
For changing business requirements, you may wish to change the language of your display messages.
To change the display language:
1.Press the Set Options key.
2.Press [ ] once or press [1] to go directly to the item.
3.Press [1] to select the language.
Setting the date and time
If you subscribe to calling line identification service, the date and time are set automatically after you receive your first incoming call. If you do not subscribe, you must set the date and time manually.
To set date and time:
1.Press the Set Options key.
2.Press [ ] twice or press [2] to go directly to the item.
