Aastra Telecom 2065, A300, A150, 2045, 2025 manual Tracing Malicious Calls, Before the call

Supplementary features

■Suppressing your call number from your called party's terminal display

You do not want your call number to appear on the terminal display of a called party in the pub- lic network.

You have two possibilities:

If you never want the phone number to be displayed, set CLIR permanently.

To suppress your call number display for certain calls only, select the function CLIR per call before dialling your party's call number.

This function must be stored under a Foxkey or a function key (see Chapter "Configuring Keys", 63).

You can also execute the function with a */# procedure (see "User’s Guide */# Procedures as of I7.1").

Before the call:

Press the function key for <CLIR>.

Notes:

CLIR works only with external calls.

This feature depends on the range of services offered by your provider.

■Tracing Malicious Calls

Your are being threatened or molested by a call. You want to identify the caller.

Using the MCID function (MCID: Malicious Call Identification), the provider records the following

call data: Your phone number, the caller’s phone number, and the date and time of the call.

MCID has to be enabled by your provider. Your provider will inform you about accessing the recorded call data.

This function must be stored under a Foxkey or a function key (see Chapter "Configuring Keys", 63).

During a call:

Press the function key for MCID (MCID).

After the call do not hang up: press the function key for MCID (MCID) while you hear the busy tone.

47