Aastra Telecom AT-200HT owner manual Setting the Time and Date

1.Press the review ! or q buttons as required to set the first digit of your area code. Press the ERASE button to move to the second digit.

2.Press the review ! or q buttons as required to set the sec- ond digit of your area code. Press the ERASE button to move to the third digit.

3.Press the review ! or q buttons as required to set the third digit of your area code. Press the ERASE button to move to set the correct time and date.

Setting the Time and Date

The AT-200HT has a built-in real time clock that will keep the current time and date. The clock is automatically set during the first call and is updated each time Caller-ID information is re- ceived.

1.It is not necessary to enter the correct time and date when the display indicates "SET TIME/DATE" after setting your area code.

2.Press the ERASE button as required until the display enters the Stand-By Screen mode as shown below.

3.After completing the setup procedure, you can change any of the above settings.

9