Aastra Telecom AT-200HT owner manual Operation, Setting the Tone/Pulse switch

Operation

Setting the Tone/Pulse switch

The AT-200HT telephone can operate in tone or pulse dialing mode.

1.Set the PULSE/TONE switch located on the side of the telephone to the desired position. See Figure 6

2.If you're not sure which service you have, set the PULSE/ TONE switch to the TONE position. Press the TALK button and dial your number.

3.If the dial tone continues, you have pulse dialing service, set the PULSE/TONE switch to the PULSE position.

Figure 6

Tone/Pulse Switch

Setting the Ringer Off/Low/Hi switch

Set the RINGER OFF/LOW/HI switch to the HI position for normal ringer sound level. See Figure 7

14