Aastra Telecom AT-200HT owner manual Using the Redial button

1.The NEW CALL icon will appear on the display.

2.If you choose not to answer the call, after approximately 15 seconds after the last ring is received, the display will change to Stand-By Screen mode.

3.The NEW CALL LED will flash, confirming new calls have been received.

4.The Stand-By Screen will continue to be displayed until an- other call is received or any button is pressed.

5.The display will indicate the total number of calls stored, as well as the number of new calls that have not yet been re- viewed.

6.If you choose to answer the call, press the TALK button. The IN USE/MUTE LED will light.

7.The call duration timer will start five seconds after you have answered the call. The elapsed time will be displayed for the duration of the call.

8.Press the TALK button again to hang up after you finish your call. Within 10 seconds, the display will return to Stand-By Screen mode and the IN USE/MUTE LED will turn off.

Using the Redial button

The REDIAL button is used to quickly redial the last number (up to 32 digits) that was previously called.

1.Press the TALK button, after dial tone is heard in the head- set, press the REDIAL button.

2.The number being called will appear on the display as it is being dialed.

17