CM16.book Page 12 Friday, June 18, 2004 3:22 PM

Once the selected number appears on the display, press the Options softkey — the display shows Save 4Directory and s=Next

Press the Select softkey. If there is no name associated with the number, the display will prompt, to enter a name to save the entry. Use the instructions in the section Adding a Name and Number to the Directory to save the entry in the Directory. If there is a name associated with the number it will automatically save it to the directory and briefly indicate item saved.

To delete an entry in the Redial list:

Press r key, and use the E and the L keys to scroll up and down through the list of the last ten numbers dialed

Once the selected number appears on the display, press the Options softkey and the L key once — the display shows Delete and s=Next

Press the Select softkey. The display will show Delete again to erase this item.

Press the Delete softkey to erase the entry. Display shows Item erased.

You can return to the main display any time by pressing the I key.

HOLD FUNCTION

To place a call on hold, press the O key. To take a call off hold, press the

Okey again.

MUTE KEY

Use the mute key when you want to be able to hear a caller but have

them not hear you. Press the Xkey to mute the handset. Press the Xkey again to disengage mute.

ALERTER TONES

The CM-16 uses tones to provide information as follows:

Low Battery

one tone every three minutes

 

 

Out of Range

whenever handset loses connection to base station

 

 

Check

Whenever you try to establish a link with the base

Line Cord

station and the DC power is not plugged in and/or

 

the line cord is not plugged into the base.

 

 

VOLUME CONTROL

The volume key, located on the side of the handset, controls both the receiver and ringer volume.

Model CM-16 User Guide 12

Page 13
Image 13
Aastra Telecom CM-16 manual To delete an entry in the Redial list, Hold Function, Mute KEY, Alerter Tones, Volume Control