Fan Speed Monitoring | Abit KV8 PRO manual

BIOS Setup	3-7

Fan Speed Monitoring:

Click <Enter> key to enter its submenu:

CPU/NB/SYS/AUX1/AUX2 FAN Speed:

These items display the speed of the fans connected to CPU, NB, SYS, AUX1 and AUX2 FAN headers.

Shutdown Enable:

Use <Space> key to enable system shutdown function. Once the system has detected that the fan speed is lower than the low limit value, system will shutdown automatically.

Beep Enable:

Use <Space> key to enable warning beeps function. If the fan speed is lower than the low limit value, warning beeps will sound.

Low Limit:

These items set the low limit of fan speed.

NOTE: Only the fans with 3-pin plugs provide the speed monitoring function.

User’s Manual

Image 35

Abit KV8 PRO user manual Fan Speed Monitoring

Contents

KV8 Pro KV8 Pro Copyright and Warranty Notice Table Of Contents Install VIA USB 2.0 Driver Save & Exit Setup Exit Without SavingInstall Audio Driver Install LAN Driver On board VT6122 10/100/1000 Mb PCI Ethernet Controller Features & SpecificationsIntroduction Introduction 2x USB headers 1x CD-IN, 1x AUX-IN header Back Panel I/O Layout Diagram KV8 Pro Hardware Setup Hardware SetupInstall The Motherboard Install CPU and Heatsink Total System Memory 128MB ~ 2GB User’s Manual Install System Memory128MB ~ 1GB Bank 2, 3 DIMM2 Chapter Connectors, Headers and Switches FAN Connectors Page USBPWR1 Page VCC Pdif Out Internal Audio Connectors Page Chapter Hardware Setup IDE Connectors Post Code Display Page Chapter Hardware Setup System Management Bus Headers AUDIO1 Bios Setup Bios Setup Chapter User Define ΜGuru Utility Chapter Temperature Monitoring Back to µGuru Utility Setup Menu Voltage Monitoring Beep Temp This item selects the warning temperature limit Fan Speed Monitoring FanEQ Control Standard Cmos Features Back to Standard Cmos Features Setup Menu Page Hard Disk Boot Priority Advanced Bios FeaturesPage Advanced Chipset Features Back to Advanced Chipset Features Setup Menu Dram Timing Selectable Bios Setup OnChip IDE Device Click Enter key to enter its submenu Integrated Peripherals Back to Integrated Peripherals Setup Menu Back to Integrated Peripherals Setup Menu Power Management Setup Resume by Ring Page Resources Controlled By PnP/PCI ConfigurationsBack to PnP/PCI Configurations Setup Menu PCI-1 PCI-2 PCI-3 PCI-4 PCI-5 PCI slot 1 shares IRQ signals with AGP slot Save & Exit Setup Load Fail-Safe DefaultsLoad Optimized Defaults Set Password Following screen appears Click Next Click Yes User’s Manual Appendix A. Install VIA 4-in-1 DriverInstall VIA 4-in-1 Driver Appendix a Appendix B. Install Audio Driver Appendix B Appendix C. Install LAN Driver Appendix C Appendix D. Install VIA USB 2.0 Driver Click Yes Click OK Click Print to File KV8 Pro Click Next User’s Manual Appendix E. Install VIA Serial ATA RAID DriverInstall VIA Serial ATA RAID Driver Appendix E Install Abit µGuru Driver Appendix F. Install Abit µGuru Driver Appendix F Award Post Code Definition Appendix G. Post Code Definition Initialize the Apic for P6 class CPU InsteadScreen logo Assign resources to all ISA PnP devices Set up floppy related fields in 40hardwareInitialize InitOnboardSuperIO Initialize InitOnbaordAUDIO Program boot up speed Enable/Disable Parity Check according to Cmos setupRead HDD boot sector information for Trend Anti-Virus code Enable L2 cache AC2003 Post Code Definition KV8 Pro Appendix H. Troubleshooting Need Assistance? Appendix H User’s Manual Motherboard Model No OS/Application Hardware Name Brand SpecificationsProblem Description KV8 Pro Model How to Get Technical Support Appendix I. How to Get Technical Support Alt.comp.hardware.homebuilt alt.comp.hardware.pc-homebuilt Appendix Fax 43-1-7346713 asguard@asguard.at Thank You Abit Computer Corporation