BIOS Setup

3-21

 

 

3-6. Power Management Setup

ACPI Suspend Type:

This item selects the type of Suspend mode.

[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.

[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.

Run VGABIOS if S3 Resume:

Three options are available: Auto ￿ Yes ￿ No. The default setting is Auto. This item can let you choose when S3 resume active, the VGA BIOS need to be initiative or not.

Resume by OnChip USB:

Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled, any event affecting from onchip USB will awaken a system that has powered down. This item can be configured only if the item “ACPI Suspend Type” is set to [S3(STR)].

Power Button Function:

This item selects the method of powering off your system:

[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will prevent the system from powering off in case you accidentally hit or pushed the power button.

[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the system.

CPU THRM-Throttling:

This item controls the CPU speed by cutting down its regular power to a percentage during the STR (Suspend To RAM) state.

Restore On AC Power Loss:

This item selects the system action after an AC power failure.

User’s Manual

Page 49
Image 49
Abit KV8 PRO user manual Power Management Setup