|
|
|
|
|
| Add to Profile |
| Select an item (SSID) on the list and then click to add it into the profile list. |
|
|
|
|
|
|
|
|
|
|
|
| Connect |
| Select an item (SSID) on the list and then click to make a connection. |
|
|
|
|
|
|
|
|
|
|
|
Access Point (AP) Information
Double click on the intended AP to see AP's detail information that divides into four parts. They are
General, WPS, CCX and 802.11n information. The introduction is as following:
General
WPS
General information contain AP's SSID, MAC address, Authentication Type, Encryption Type, Channel, Network Type, Beacon Interval, Signal Strength and Supported Rates.
Close: Click this button to exit the information screen.
WPS information contains Authentication Type, Encryption Type, Config Methods, Device Password ID, Selected Registrar, State, Version, AP Setup Locked,
Authentication Type: There are four types of authentication modes supported by RaConfig. They are Open, Shared,
Encryption Type: For Open and Shared authentication mode, the selection of encryption type are None and WEP. For WPA, WPA2,
Config Methods: Correspond to the methods the AP supports as an Enrollee for adding external Registrars.
Device Password ID: Indicate the method or identifies the specific password that the selected Registrar intends to use.
- 18 -
