Abocom WU5214 Rotate Disconnect, WPS Associate IE, WPS Probe IE Progress Bar Status Bar

Rotate

Disconnect

Command to rotate to connect to the next network inside credentials.

Stop WPS action and disconnect this active link. And then select the last profile at the Profile Page. If there is an empty profile page, the driver will select any non-security AP.

Export Profile	Export all credentials to Profile.
Delete	Delete an existing credential. And then select the next credential if exist. If
	there is an empty credential, the driver will select any non-security AP.
PIN	Registrar: Add the AP’s PIN code into the PIN code column, and press the
	device PIN button. It will connect with the AP in two minutes and get IP
	address.
	Enrollee: Input the device’s PIN code into the PIN code column of AP. Start
	AP WPS process and click device PIN button. Then, the device will connect
	to AP in two minutes and get IP address.
PBC	Start to add to AP using PBC (Push Button Configuration) method. Click this
	button to connect the AP which supported WPS function within two minutes.
	Meanwhile, the AP should also click the PBC button simultaneously.
Note:

After the users click PIN or PBC, please do not rescan within two minutes of the connection. If users want to stop this setup within the interval, restart PIN/PBC or click "Disconnect" to stop WPS action.

WPS Associate IE

Send the association request with WPS IE during WPS setup. It is optional for STA.

WPS Probe IE

Progress Bar

Status Bar

Send the probe request with WPS IE during WPS setup. It is optional for STA.

Display rate of progress from Start to Connected status.

Display currently WPS Status.

- 52 -