Fast EtherHub-12s User’s Guide
D-4 Regulatory Standards Compliance
Safety Compliance

Underwriters Laboratories Inc.

Important!
Before making connections, make sure you have the correct Cord Set.
Check it (read the label on the cable) against the following specification list.
Operating Voltage Cord Set Specifications
120 Volts UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor cord
Maximum length of 15 feet
Parallel blade, grounding type attachment plug rated 15A, 125V
240 Volts (For North America) UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor cord
Maximum length of 15 feet
Tandem blade, grounding type attachment plug rated 15A, 125V
240 Volts (For Europe only) Cord Set with H05VV-F cord h a vi n g t h ree conductors with minimum
diameter of 0.75 mm2
IEC-320 receptacle
Male plug rated 6A, 250V
The unit will automatically select the setting that matches the input voltage connected.
Therefore, no additional adjustments are necessary when connecting it to any input
voltage within the range marked on the rear panel.