Fast EtherHub-12s User’s Guide
Figure 3-3 Cabling Limits for Multiple Hub Configuration
Notes:
1.The maximum length for each cable must be determined by calculations for the longest path (i.e.,
2.To control the number of hubs in a path, we recommend that one hub be used to connect to several other hubs. Make sure there is only one path between any two stations on the network.
3.If you need to connect network devices over a long distance, use a switching hub or router to split the network up into two or more collision domains. For detailed information on purchasing the required equipment, contact your local distributor or Accton representative for support.
Configuring the Network |
