Altos 1100E Series User’s Guide

4-2

Table 4-1 Default Settings for SCSI Controller and All Devices

Global Settings for SCSI Controller and All Devices Default Value

Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Termination Automatic
Boot Channel/ Boot SCSI I/O A/0 (zero)
Host Adapter BIOS1Enabled
Support Removable Disks Under BIOS as Fixed Disks Boot only
Extended BIOS Translation for DOS Drives > 1 Gbyte Enabled2
Display <Ctrl-A> Message During BIOS Initialization Enabled
BIOS Support for Bootable CD-ROM Enabled
BIOS Support for Int13 Extensions Enabled

Individual Settings for Each SCSI Device Default Value

Initiate Wide Negotiation Yes
Maximum Sync Transfer Rate 80 MBytes/sec.
Enable Disconnection Yes
Send Start Unit Command1Yes
Initiate Wide Negotiation Yes
1 Settings are valid only if host adapter BIOS is enabled.
2 Do not change this setting from the default.