Chapter 1 – System Housing 1-27
Connector Description
CN1 SCSI 68-pin P connector - In
CN2 Front power LED connector
CN3 I2C Buffer connector
CN5 Slot 1
CN7 Slot 2
CN8 SCSI 68-pin connector - Out
CN9 Slot 3
JP5 Power connector
S1 Slot 1 ID switch
S2 Slot 2 ID switch
S3 Slot 3 ID switch
1.10.2 BPL5 LVD SCSI Backplane Board
The LVD SCSI hot-swap cage includes a hot plug SCA LVD backplane, LED board,
and the hard drive cage itself. It supports five 1-inch SCA SCSI hard drives in one
channel with active terminator built-in. The SCA connector design allows for the
addition and removal of SCSI drives without shutting down the system.
The BPL5 hot-swap cage box includes the following components:
• One hot-swap cage (with backplane board attached)
• Five hard disk drive trays
• One system board connector cable
• Two hard disk drive fault LED connector cables