Chapter 4 – SCSISelect Configuration Utility 4-9
Host Adapter SCSI Termination
This option allows you to configure host controller SCSI termination. The
following figure shows the choices available if you have an AHA-3950U2B.
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( =default)
Adaptec AHA-3950U2B SCSISelect (TM) Utility
AHA-3950U2B at Bus:Device 01:06h
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID................................7
SCSI Parity Checking................................ Enabled
Host Adapter SCSI Termination.................Automatic
Additional Options
Boot Device Options..................................Press <Enter>
SCSI Device Configuration........................Press <Enter>
Advanced Configuration Options............... Press <Enter>
<F6> - Reset to Host Adapter Defaults
*
Automatic
* Enabled
Disabled
Figure 4-6 Host Adapter SCSI Termination Selection for AHA-3950U2B
Use the cursor (↑ ↓) and Enter keys to make your selection.