Altos 1100E Series User’s Guide2-16
1. Press the processor module down until the edge connector snugly fits into the
socket.
The edge connector of the Pentium module is
slotted so that it only fits in one direction.
Make sure the module groove matches the
one on the processor socket.
Figure 2-4 Installing a Pentium III Processor
2. Press the latches on the sides to lock the processor module into place.
3. Connect the fan and temperature connectors (see Figure 2-2 and Table 2-2):
CPU1 fan connector – CN20
CPU1 temperature connector – CN16
CPU2 fan connector – CN9
CPU2 temperature connector – CN10