Altos 1100E Series User’s Guide
4-16
Advanced Configuration Options
When you select Advanced Configuration Options, a screen similar to the figure
below appears. Do not change these options unless absolutely necessary.
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( =default)
Adaptec AHA-3950U2B SCSISelect (TM) Utility
AHA-3950U2B at Bus:Device 01:06h
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID................................7
SCSI Parity Checking................................ Enabled
Host Adapter SCSI Termination.................Low ON/High ON
Additional Options
Boot Device Options..................................Press <Enter>
SCSI Device Configuration........................Press <Enter>
Advanced Configuration Options............... Press <Enter>
<F6> - Reset to Host Adapter Defaults
*
Advanced Configuration Options
Reset SCSI BUS at IC Initialization ..............................................................Enabled
Display <Ctrl-A> Message During BIOS Initialization.................................... Enabled
Extended BIOS Translation for DOS Drives > 1Gbyte .................................. Enabled
Verbose/Silent Mode.....................................................................................Verbose
--------------Options Listed Below Have NO EFFECT if the BIOS is Disabled--------------
Host Adapter BIOS....................................................................................... Enabled
Support Removable Disks Under BIOS as Fixed Disks.................................Boot Only
BIOS Support for Bootable CD-ROM............................................................ Enabled
BIOS Support for Int13 Extensions............................................................... Enabled
Figure 4-9 Advanced Configuration Options Screen
Use the cursor keys (↑ ↓) to move between options. Press Enter to display a pop-
up menu with a selection of options. Use the cursor keys (↑ ↓) to select an option,
and press Enter to make your selection.