Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings.
Parameter | Description | Options |
|
|
|
The function is supported only when the CPU | Enabled/Disabled | |
Technology | installed is 3.06G or above. The system will |
|
| automatically hide this selection when detecting the |
|
| CPU frequency is below 3.06G or the CPU does not |
|
| support |
|
|
|
|
Infrared Port | Enables, disables or auto detects the infrared port. | Disabled/Disabled/Auto |
|
|
|
Parallel Port | Enables, disables or auto detects the parallel port. | Enabled/Disabled/Auto |
|
|
|
Mode | Sets the operation mode of the parallel port. | ECP, EPP, Output only or Bi- |
|
| directional |
Base I/O address | Sets the I/O address of the parallel port. | 378/278 |
|
|
|
Interrupt | Sets the interrupt request of the parallel port. | IRQ7/IRQ5 |
|
|
|
DMA channel | Sets a DMA channel for the printer to operate in | DMA3/DMA1 |
| ECP mode. This parameter is enabled only if Mode |
|
| is set to ECP. |
|
|
|
|
37 | Chapter 2 |
