Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings.
Parameter | Description | Options |
|
|
|
Infrared Port | Enables, disables or auto detects the infrared port. | Disabled/Disabled/Auto |
Parallel Port | Enables, disables or auto detects the parallel port. | Enabled/Disabled/Auto |
|
|
|
Mode | Sets the operation mode of the parallel port. | ECP, EPP, Normal or |
|
|
|
Base I/O address | Sets the I/O address of the parallel port. | 378h/278h/3BCH |
|
|
|
Interrupt | Sets the interrupt request of the parallel port. | IRQ7/IRQ5 |
|
|
|
DMA channel | Sets a DMA channel for the printer to operate in | DMA3/DMA1 |
| ECP mode. This parameter is enabled only if Mode |
|
| is set to ECP. |
|
|
|
|
Legacy USB Support | Enables, disables USB interface devices support | Option: Disabled or Enabled |
| under DOS mode. |
|
39 | Chapter 2 |
