Power Switch 4 sec, System Wake-up Event | Acer 500L specs

System Sleep Timer

This parameter sets the system to the lowest power-saving mode after a specified period of inactivity. Any keyboard or mouse action or any activity detected from the IRQ channels resumes system operation.

Sleep Mode

This parameter lets you specify the power-saving mode that the system will enter after a specified period of inactivity. The options are Standby and Suspend modes.

This parameter becomes configurable only if the System Sleep Timer is enabled. Any keyboard or mouse action, or any enabled monitored activities occurring through the IRQ channels resume system operation.

Power Switch < 4 sec.

When set to Power Off, the system automatically turns off when the power switch is pressed for less than 4 seconds. When set to Suspend, the system enters the suspend mode when pressed for less than 4 seconds.

System Wake-up Event

The system wake-up event allows the system to resume operation when the modem ring indicator is enabled.

Modem Ring Indicator

When Enabled any fax/modem activity wakes up the system from suspend mode. The default setting is Enabled.

3-22	AcerAltos 500L User’s Guide

Image 68

Acer 500L manual Power Switch 4 sec, System Wake-up Event, System Sleep Timer, Modem Ring Indicator

Contents

AcerAltos 500L Copyright Important Safety Instructions Page Page FCC Class B Radio Frequency Interference Statement Getting Started Conventions Table of Contents Bios Utility Page Xii System Housing Standalone System Features Front Panel Rear Panel Internal Structure Opening the Housing Panels Left Panel Installing Disk Drives Inch Floppy Drive Inch Drives Hard Disk Drives Installing Expansion Cards System Housing Page System Board Major Components System Board Layout Jumpers and Connectors Jumper and Connector Locations Jumper Settings Connector Functions Power switch ESD Precautions Installing the Pentium II Processor Attaching the Processor Fan Sink System Board AcerAltos 500L User’s Guide Installing a Pentium II Processor AcerAltos 500L User’s Guide Removing a Pentium II Processor AcerAltos 500L User’s Guide Memory Upgrade Memory Configurations Installing a Dimm Removing a Dimm Reconfiguring the System System Error Messages Error MessagesSoftware Error Messages Mmmmssssooo Wxxxx System Board Correcting Error Conditions Bios Utility Entering Setup Setup Utility Bios Utility System Information Processor Processor SpeedInternal Cache Size External Cache IDE Primary Channel Master IDE Primary Channel SlaveIDE Secondary Channel Master IDE Secondary Channel Slave PS/2 Mouse Serial PortParallel Port Product Information Product NameSystem S/N Main Board ID Main Board S/N System Bios VersionDMI Bios Version Disk Drives Floppy Drives IDE Primary Channel Master LS-120 Drive Compatible AsIDE Drives IDE Secondary Channel Slave IDE Primary Channel SlaveIDE Secondary Channel Master Enhanced IDE Features Hard Disk Block Mode Bios Utility Base Address Onboard PeripheralsSerial Ports 1 Operation Mode 3BCh 378h Onboard Device Settings EPP Floppy Disk Controller IDE ControllerPS/2 Mouse Controller USB Host Controller SMBus Interrupt IRQ9 IDE Hard Disk Standby Timer Power ManagementPower Management Mode Power Switch 4 sec System Sleep TimerModem Ring Indicator System Wake-up Event Boot Options Boot Sequence First Hard Disk Drive Fast BootSilent Boot Num Lock After Boot Configuration TableBoot from LANDesk Service Agent Memory Test Date and Time Date Time System Security Setup PasswordTo set or change a Password Set or Change Password To remove your Setup Password Power-on Password To bypass Setup Password Power-on Password Disk Drive Control Bios Utility Advanced Options Memory/Cache Options Memory at 15MB-16MB Reserved for Internal Cache CPU CacheExternal Cache PnP/PCI Options Memory Parity ModePCI IRQ Setting PCI IRQ Sharing VGA Palette Snoop Reset Resource Assignments CPU FrequencyGraphics Aperture Size Plug and Play OS Processor Speed Bus FrequencyCPU Multiple Load Default Settings Abort Settings Change Exit Setup SCSI/VGA Combo Card Page LCD Module Event Log List