Chapter 1 3
Opening and Closing the Display
To open the display, slide the display cover latch to the left and lift up the
cover. Then tilt it to a comfortable viewing position. The comput er employ s a
microswitch that turns off the display (and enters standby mode) to conserve
power when you close the display cover and turns it back on when you open
the display cover.
Note:
If an external monitor is connected, the computer turns off the
display (but does not enter standby mode) when you close the
display cover.
To close the display cover, fol d it down gently until the display cover latch
clicks into place.
Caution: To avoid damaging the display, do not slam it when you close it.
Also, do not place any object on top of the computer when the display is
closed.