
Device Address Conflict Run “Load Default Settings” i n BIOS Setup Utility.
RTC battery
System board
Allocation Error for: device Run “Load Default Settings” in BIOS Setup Utility.
RTC battery
System board
Failing Bits: nnnn DIMM
BIOS ROM
System board
Fixed Disk n None
Invalid System
Configuration Data BIOS ROM
System board
I/O device IRQ conflict Run “Load Default Settings” in BIOS S etup Utility.
RTC battery
System board
Operating system not found Enter Setup and see if fixed disk and drive A: are
properly identified.
Diskette drive
Hard disk drive
System board
No-Beep SymptomsSymptom / Error Action in Sequence
No beep, power-on
indicator turns off and LCD
is blank.
Power source (battery pack and power adapter).
Power System Check.
Ensure every connecto r is connected tight and
correct.
Reconnect the DIMM.
CPU board.
DC-DC/charger board.
System board.
Error Messages ListError Messages Action in Sequence