34 System Utilities

Startup Configuration

The Startup Configuration screen contains parameters that are related to

computer startup.

The following table describes the parameters in this screen. Settings in

boldface are the default and suggested parameter settings.
Parameter Description
Boot Display Sets the display on boot-up.
When set to Auto, the comp ut e r au to ma tica ll y d et er min es t he
display device. If an external display device (e.g., monitor) is
connected, it becomes the boot display; otherwise, the
computer LCD is the boot display. When set to Both, the
computer outputs to both th e computer LCD and an exte rnal
display device if one is connected.
Options: Auto or Both
USB Function
Support Enables or disabl es the USB (Universal Seri al Bus) function.
Options: Disabled or Enabled
Hotkey Beep When enabled, the computer gives off a beep when a hotkey
(key combination is pre ssed). See "The Euro Symb ol" for
details on hotkeys.
Options: Enabled or Disabled
ACPI OS Fast
Boot When set to enabled, the Quiet Boot and the PnP OS is
disabled or inactive.
Options: Enabled or Disabled
Quiet Boot When set to enabled, the system will boot to the OS as fast
as possible and procee d quickly through POST. This mod e
will not show any boot p rogression messages, nor will it
perform any memory and diagnostic test.
Options: Enabled or Disabled