4.Peel back any mylar adhered to the Media Board.
5.Tilt the Media Board up to clear the securing pins.
6.Remove the Media Board, pulling the FFC through the cover as shown. IMPORTANT: Ensure that the FFC is not torn off during removal.
Chapter 3 | 76 |
4.Peel back any mylar adhered to the Media Board.
5.Tilt the Media Board up to clear the securing pins.
6.Remove the Media Board, pulling the FFC through the cover as shown. IMPORTANT: Ensure that the FFC is not torn off during removal.
Chapter 3 | 76 |