Symptom/Error | Action in Sequence |
|
|
System configuration | Enter BIOS Setup Utility to execute “Load Default Settings”, |
does not match the | then reboot system. |
installed devices. | Reconnect hard |
|
|
External display does not | Press Fn + F5, LCD/CRT/Both display switching |
work correctly. | System board |
|
|
USB does not work | System board |
correctly. |
|
|
|
Print problems | Ensure the “Parallel Port” in the “Onboard Devices |
| Configuration” of BIOS Setup Utility is set to Enabled. |
| Onboard Devices Configuration |
| Run printer |
| Printer driver |
| Printer cable |
| Printer |
| System Board |
|
|
Serial or parallel port | Ensure the “Serial Port” in the Devices Configuration” of BIOS |
device problems. | Setup Utility is set to Enabled. |
| Device driver |
| Device cable |
| Device |
| System board |
|
|
Symptom/Error | Action in Sequence |
|
|
Keyboard (one or more | Reconnect the keyboard cable. |
keys) does not work. | Keyboard |
| System board |
|
|
Touchpad does not work. | Reconnect touchpad cable. |
| Touchpad board |
| System board |
|
|
Symptom/Error | Action in Sequence |
|
|
Internal modem does not | Modem phone port |
work correctly. | modem combo board |
| System board |
|
|
Note: If you can not correct the problems according to the anterior tables, see “Undetermined Problems”.
85 | Chapter 4 |
