Removing the Switch Cover
CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is recommended that only fingers are used to remove the Switch Cover.
1.See “Removing the Battery Pack” on page 48.
2.Locate and remove the two securing screws as shown.
Step | Size | Quantity | Screw Type |
|
|
|
|
Switch Cover | M2.5*L5 (NL) | 2 |
|
|
|
|
|
3.Turn the computer over and open the LCD module fully to expose the Switch Cover.
4.Starting from the right side, lift the Switch Cover and move left as shown.
IMPORTANT:Do not remove both sides of the Switch Cover together to prevent damage to the cover. Instead, lift one end first and follow the instructions as directed.
62 | Chapter 3 |
