Acer G610 manual 103, Yes

		103
Parameter	Description	Option
Onboard SCSI	Allows you to manually assign the	User input
	interrupt for the onboard SCSI when the
	PCI IRQ Setting parameter is set to Manual.
	This parameter is grayed and not user-
	configurable when the PCI IRQ Setting is
	set to Auto.
Onboard LAN	When you set the PCI IRQ Setting	User input
	parameter to Auto, this parameter
	specifies the auto-assigned interrupt for
	the onboard LAN. If you set the PCI IRQ
	Setting parameter to Manual, you need to
	specify the interrupt that you want to
	assign for the onboard LAN installed in
	your system.

PCI IRQ	Setting this parameter to Yes allows you to
Sharing	assign the same IRQ to two different
	devices. To disable the feature, select No.
	Note: If there are no IRQs available to
	assign for the remaining device function, it
	is recommended that you enable this
	parameter.

Yes

No

VGA Palette	This parameter permits you to use the
Snoop	palette snooping feature if you installed
	more than one VGA card in the system.
	The VGA palette snoop function allows the
	control palette register (CPR) to manage
	and update the VGA RAMDAC (Digital
	Analog Converter, a color data storage) of
	each VGA card installed in the system. The
	snooping process lets the CPR send a signal
	to all the VGA cards so that they can
	update their individual RAMDACs. The
	signal goes through the cards continuously
	until all RAMDAC data has been updated.
	This allows the display of multiple images
	on the screen.
	Note: Some VGA cards require specific
	settings for this feature. Check your VGA
	card documentation before setting this
	parameter.

Disabled

Enabled