25
network port (black port) located on the rear panel of your
system.
Note: Consult your operating system manual for information on
how to configure your network setup.
Connecting the power cable
Caution! Before you proceed, check the voltage range in your
area. Make sure that it matches your system’s voltage setting (see
the voltage setting switch located on the rear panel of your
system). If they don’t match, change your system’s voltage setting
according to your area’s voltage range.
Plug the power cable into the power cable socket located on the rear
panel of your system. Then plug the other end of the power cable into
AAG600.book Page25 Thursday,August 23, 2001 2:31PM