4 BIOS Setup utility
88
Single
Processor MP
Table
Enabling this parameter allows BIOS to
create a multiprocessor (MP) table for
Windows NT use. In a single-processor
system running Windows NT, you may
disable this parameter to enhance system
performance. If you install another
processor for a dual (or multiprocessor)
system, enable this parameter and then
reinstall Windows NT.
In cases when this parameter is enabled
before installing Windows NT in a single-
processor system, you may upgrade to a
multiprocessor system without reinstalling
Windows NT.
Enabled
Disabled
MPTable
Version This parameter shows the multiprocessor
specificationcompliance version. The
defaultsetting is V1.4. If you install an older
operatingsystem, particularly SCO UNIX
V3.2.x.xor earlier, set this parameter to V1.1
V1.4
V1.1
Parameter Description Option
AAG600.book Page88 Thursday,August 23, 2001 2:31PM