Acer G610 manual Parameter Description Option

97

Parameter Description Option

Console	This parameter lets you enable or disable
Redirection	the connection to the RDM manager
	station. If enabled and conditions are met,
	the RDM-enabled server automatically
	dials the RDM manager station using the
	phone number specified in the Remote
	Console Phone No. parameter when the
	server reboots. Once the connection is
	established, both the RDM server and RDM
	manager station display the same screen
	which enables the RDM manager station to
	function the same as the server console.
	Setting this to Disabled deactivates the
	RDM manager station.

Disabled Enabled

Hidden	If you want the hidden partition to
Partition	become accessible, set this parameter to
	Enabled. When enabled, the server boots
	to the hidden partition.

Disabled Enabled

Communication	This parameter specifies the parity, stop
Protocol	bits, and data length for the COM port to
	be used for the RDM connection. This is
	fixed at N(none), 8, 1 setting and is non-
	configurable

N

8

1

COM Port Baud	This parameter lets you set the transfer
Rate	rate of the COM for the RDM connection.
	The parameter setting depends on your
	modem specification; therefore, before
	you change the setting of this parameter,
	check the documentation that came with
	your modem.

9600

57600