12
ACER X193HQ
4. Assembly and Disassembly Procedures
Go to cover page
4.1 Assembly procedures:
Connect the cable between power board(P802)
S1 | and interface board (P301) |
|
Connect the function key cable into interface
board(P304)
Connect the FFC cable into interface board
P802
P304
P301
FFC
Use a
S2 No.1~4 screws till that power board and bracket chassis base firmly attached.(No1~3 screw size=M3x6; No4 screw size=M4x8; Torque=9~10KGFxCM).
1 | 2 |
|
S4
S5
Take the key function cable out from the hole shown as photo
Fix the function key cable with a PVC tape
Turn the monitor faced down and put it on the bracket chassis module till both parts firmly Connect FFC cable to LCD panel. There are two locks over here when plugging in should be noticed
3 | 4 |
Use a
S3 No.1~2 screws till that interface board and bracket chassis base firmly attached.
(No1~2 screw size=M3x6; Torque=9~10KGFxCM).
Plug in parallel direction
1
2
